HYPERTOOLS Sign-Up! My StartPage Web Mail My Account Support

SIGN UP
PRICING
COMPARE
ACCESS NUMBERS
FAQ
CUSTOMER SERVICE
DOWNLOADS
RESELLER
CONTACT US
ABOUT US



Check This Out!


You pay just $10 a month!


Or...
Save $$$ with our Spring Special!!!
Just $99 for an entire year (prepaid)!
That's as low as $8.25/month!

Nationwide Access

Find your Hyperconnections Local Access Number

Hyperconnections Top 10
Top ten reasons why you should sign-up today!

  1. Get Instant Access with our Online Sign-up
  2. No Credit Card Required
  3. Nationwide--No Toll Out of Town
  4. Free 24/7 Tech Support
  5. Email SPAM Filter and POP-UP Blocker
  6. No Advertisements
  7. Use your existing Instant Messenger
  8. 15 Email Accounts and 20MB Webspace--FREE
  9. Fast, Clean, Clear Digital Connections--No Busy Signals
  10. More Newsgroups, Newsgroups, Newsgroups

Configure your Mac (MacOS 8.x and over)
or call support 24/7 toll-free (888) 817-8323

To configure your access to Hypercon.net on your Mac, launch the Internet Setup Assistant on your Mac and follow these step-by-step guidelines.

Mac Internet Setup Assistant Guided Installation

  1. Open up the Assistants folder and double click on the Internet Setup Assistant icon. Click on "Yes" in the "Welcome" screen.

  2. Click on "Yes" in the "Internet Account" screen.

  3. Click the right arrow in the "Introduction" screen to continue.

  4. Enter the name for this configuration (Hypercon.net). Also ensure that "modem" is checked. Click the right arrow to continue.

  5. Select the "modem" you are using from the drop down list above. Select the "port" to which your modem is attached. Click the right arrow to continue.

  6. Enter in "Your Local Access Number", "Your Dial-up Login" (be sure to include the "" prefix, i.e.: username@hypercon.net) and "Your Password" in the spaces provided. Click on the right arrow to continue.

  7. Answer "No" to that question on PPP Connect Scripts. Click the right arrow to continue.

  8. Answer "No" to that question on IP Address. Click the right arrow to continue.

  9. Enter the following addresses as indicated.
    208.179.155.1
    208.179.155.2
    Click the right arrow to continue.

  10. Enter in your Hypercon email address (i.e., "username@hypercon.net") and your password. Click on the right arrow to continue.

  11. Enter the e-mail account information (or POP information), replace "EmailName" with your personal email name (i.e., username@mail.hypercon.net). Enter the "SMTP host" as follows: smtp.hypercon.net. Click on the right arrow to continue.

  12. Enter "news.hypercon.net" as your newsgroup host computer. Click the right arrow to continue.

  13. Answer "No" to that question on proxy servers. Click the right arrow to continue.

  14. To complete your Internet Settings, and save your settings, click "Go Ahead." To connect in the future, you can use the Remote Access section of the Control Strip, or the Remote Access Control Panel.


 

 

 

2002 Hyperconnections, Inc.
All rights reserved.
Sign Up | Access Numbers | FAQ | Customer Service
Downloads | Contact Us | Terms & Conditions | About Us | Home